ENGINEERING THERMOPLASTIC / ACETAL

Acetal (POM) Injection Molding Service

Evaluate POM for the stiffness, mating surfaces and molded dimensions of gears, sliding parts and fasteners. Connect homopolymer/copolymer grades, crystallization shrinkage, thick-section voids and assembly requirements with tooling and samples.

Homopolymer and copolymer grades · Friction and wear · Shrinkage and fit
POM carrier for a precision motion assembly
POM carrier for a precision motion assembly

Get a Quote for POM Molded Parts

Describe the mating surface, load, speed, lubrication and temperature conditions. Share critical fits, gear features or snap requirements, and identify media exposure or documentation needs before selecting the grade.

Discuss your project ↗
WHAT TO SHARE
  1. 3D CAD, drawings, tooth geometry or critical fits
  2. Sample, initial order and ongoing quantities
  3. Specified POM-H / POM-C grade, color or functional targets
  4. Loads, speed, mating surfaces, media and acceptance requirements

POM Injection Molding Options

Bearing-seat and mounting details on a POM carrier
01

Sampling & Functional Review

Check gear teeth, sliding clearances, snaps and assembly with molded samples. Define wear and cycle tests around the actual mating surface and load.

POM fluid-line bodies prepared for batch review
02

Repeat Production Planning

Connect grade, packing, cooling, part weight and critical dimensions. Establish sample approval and batch acceptance around cavities and thick-section risks.

Natural and black POM flanged components
03

POM-H & POM-C Selection

Compare homopolymer, copolymer and modified POM for mechanical behavior, media exposure and processing. If the drawing calls for Delrin, include the full brand and grade designation.

Start Your POM Molding Project

Share your drawings, quantity, fits and friction or load requirements.

Get a POM Molding Quote

POM Injection Molding Capabilities

ItemProject review
Grade & functionReview homopolymer or copolymer grades for friction, loads, media and documentation
Tooling & fillingPlan gates, packing of heavy sections, cooling and demolding
Dimensions & fitAgree on datums, shrinkage review, measurement timing and functional fit
Sampling & acceptanceValidate appearance, dimensions, internal defects and agreed function separately
Surface & assemblyReview contact surfaces, color, marking adhesion and mechanical connections
Bore and mounting face on a POM support
DESIGN FOR MANUFACTURING

Review Shrinkage, Heavy Sections & Moving Contacts

01Walls, Gates & Packing

Review local heavy sections and plan packing around gate size and freeze-off. Thick walls can produce sink or internal voids; agree on inspection methods for the geometry and risk.

02Crystallization, Cooling & Dimensions

Review mold temperature, cooling and dimensional change after ejection. Set shrinkage compensation from the selected grade and tool trials.

03Thermal History & Material Compatibility

Control melt temperature and residence time for the grade, including storage and drying where needed. Avoid incompatible resin contamination during material changes and purging; higher temperature is not a universal filling remedy.

04Gears, Snaps & Demolding

Review geometry against loads, corners, tooth features and snap deflection. Coordinate draft, ejection and surface requirements. Low friction does not mean every geometry can be molded with zero draft.

POM Surface & Appearance Options

Separate molded surfaces, resin color and secondary markings. Friction contacts and cosmetic areas may need different finishes. POM’s low surface energy makes printing and bonding a specific review topic.

Smooth POM sleeve surface
APPEARANCE DIRECTION · 01

Smooth Molded Surface

Plan smooth contact and visible areas together with ejection. Define friction and wear targets against the mating material, load and exposure.

Include Fit & Internal Quality in Sample Criteria

Accept dimensions, surfaces and function separately, with risk-based void inspection for heavy sections. Define mating surfaces, loads and cycles for gear, sliding or snap features before assessing samples.

Use & grade → Trial packing review → Fit/function approval → Batch acceptance

Acetal (POM) Material Properties

CAMPUS data for Celanese HOSTAFORM C 9021 XAP2 covers this POM copolymer molding grade. The XAP2 predrying guidance supports its low-emission objective. Follow the specific grade instructions for other POM formulations.

Physical & Mechanical Reference

PropertyTypical valueMethod / conditions
Density1,410 kg/m³ISO 1183
Tensile modulus2,700 MPaISO 527
Yield stress64 MPaISO 527
Notched Charpy impact6.5 kJ/m²ISO 179/1eA; +23°C
Molding shrinkage, parallel2.0%ISO 294-4, 2577
Molding shrinkage, normal1.9%ISO 294-4, 2577

Thermal & Processing Reference

PropertyTypical valueMethod / conditions
Melting temperature166°CISO 11357-1/-3; 10°C/min
Heat deflection temperature104°CISO 75-1/-2; 1.80 MPa
Predrying for XAP2 low-emission objective100–120°C; 3–6 hRecirculating-air dryer; layer max. 40 mm; guidance for this grade only
Maximum water content0.1%Supplier processing guidance for this grade
Melt-processing temperature180–190°CSupplier injection-molding guidance for this grade
Mold temperature80–120°CSupplier injection-molding guidance for this grade
Water absorption, published value0.65%Sim. to ISO 62; exposure duration not shown on the page

Use HDT and melting point to compare thermal behavior, then evaluate the intended service temperature and loads. Review colorants, additives and shrinkage for the selected grade. Include any emissions target, dimensional checks and cycle requirements in the sample plan.

Reference grade: Celanese HOSTAFORM C 9021 XAP2, CAMPUS datasheet (source name HOSTAFORM® C 9021 XAP®2). Read on 2026-10-20; no document revision date was displayed.

Why Choose PlasticHubs

01

Selection from Contact Conditions

Review mating material, loads, speed and media together to define the grade and validation targets.

02

Tooling to Production

Connect gates and packing, cooling, tool trials and batch acceptance through our group manufacturing resources.

03

Function & Assembly

Check teeth, clearances, snaps and mechanical connections during sampling so functional needs inform tooling decisions.

04

Quality & Project Support

Turn critical dimensions, heavy-section risks and surface requirements into checks throughout quotation, sampling and production discussions.

What Is Acetal (POM)?

POM granules beside a molded support
POM granules beside a molded support

POM, or polyoxymethylene, is also called acetal and is a semi-crystalline engineering thermoplastic. It is considered for gears, sliding and snap components; actual friction, wear and dimensional behavior depend on the grade and operating conditions.

POM-H is the homopolymer and POM-C the copolymer; compare formulation, processing and media compatibility separately. Delrin is a brand name, not a generic name for every copolymer or other POM. Check the full grade when a brand is specified.

Applications for Injection Molded POM

POM geared shafts for motion components
01

Gear Shafts & Motion Parts

Review material and geometry around end gears, shaft fit, loads and speed. Validate motion, wear and dimensions with the actual mating parts and lubrication conditions.

POM valve body for a fluid-control assembly
02

Fluid-control Valve Bodies

Review POM valve bodies around ports, sealing fits and mounting interfaces. Confirm material compatibility for the fluid, temperature, pressure and cycling conditions, and validate function with finished-part tests.

POM quick-connect tube fitting
03

Tube Connectors

Check interface dimensions, assembly and local walls for tees and similar fittings. Confirm media, loads and sealing behavior through the part design and tests.

POM mounting flange for an actuator
04

Mounting Plates & Covers

Review holes, fits, fastening and local loads for circular covers or mounting features. Accept appearance, dimensions and function separately.

POM Benefits and Selection Limits

Combine Moving Fits with Molded Features

POM grades can be selected around stiffness, sliding contacts and snaps. Molding integrates teeth, mounting and local connection features; evaluate economics against tooling investment, demand and functional validation.

When Should the Material Be Reconsidered?

Check grade compatibility for heat, oxidizing media, outdoor exposure, bonding and printing. For food, drinking-water or medical contact, specify the use conditions and required material documentation.

POM INJECTION MOLDING FAQ

POM Injection Molding FAQs

Acetal grades, processing, shrinkage, moving fits and marking questions.

Do POM, acetal and Delrin mean the same thing?

POM and acetal identify the polyoxymethylene material family; Delrin is a brand name. Specify homopolymer or copolymer type and the full grade rather than treating every POM formulation as the same Delrin.

How should POM-H and POM-C be selected?

Compare candidate POM homopolymer and copolymer grades for stiffness, toughness, friction, wear, media and processing using matched test conditions and representative samples.

What temperature and drying conditions are used for POM molding?

Use grade-specific instructions. For the reference HOSTAFORM C 9021 XAP2, supplier guidance lists a 180–190°C melt and an 80–120°C mold. Its 100–120°C, 3–6-hour predrying guidance specifies a recirculating-air dryer and maximum 40 mm layer for that grade’s low-emission objective; it is not universal POM guidance.

How are POM shrinkage, sink and internal voids addressed?

Review walls, gate freeze, packing and cooling together. Establish compensation from the grade and trials, with internal inspection for heavy sections. Neither higher packing nor one shrinkage percentage solves every geometry.

Can POM gears and sliding parts operate without lubrication?

Base lubrication on the selected grade, mating material, contact pressure, speed and environment. Check wear and function over the intended duty cycle.

Can POM be printed or bonded?

Suitable surface preparation, ink or bonding systems can be evaluated, but low surface energy makes adhesion critical. Validate rubbing, cleaning and environmental behavior with samples, and consider mechanical assembly without assuming ordinary inks or adhesives apply directly.

What is needed for a POM quote and sample approval?

Share CAD, drawings, quantity, grade or performance targets, including fits, loads, speed, media and surfaces. Tooling, cavities, resin, cycle and inspection scope affect the quote; approve dimensions, assembly, appearance and agreed function separately.

Start Your POM Injection Molding Project

Share your CAD, material, quantity, and key requirements. Our team will review your project and prepare a quote.

Request a Quote