ENGINEERING THERMOPLASTIC / NYLON 6

Nylon 6 (PA6) Injection Molding Service

Plan PA6 grades around the loads, friction and assembly needs of gears, clips and structural parts. Connect material drying, moisture-related property changes and dimensional acceptance with tooling and production.

Unfilled and modified grades · Drying and conditioning · Dimensional review
PA6 structural bracket for an equipment assembly
PA6 structural bracket for an equipment assembly

Get a Quote for PA6 Molded Parts

Along with CAD and quantity, describe loads, fit clearances, wear contacts and temperature/humidity exposure. State whether assembly or inspection follows conditioning, so dimensions after molding are not treated as dimensions in service.

Discuss your project ↗
WHAT TO SHARE
  1. 3D CAD, drawings, mating dimensions and assembly method
  2. Sample, initial order and ongoing quantities
  3. Specified PA6 grade, filler content or functional targets
  4. Service temperature/humidity, inspection condition, finish and documentation requirements

PA6 Injection Molding Options

Mounting details on a PA6 support bracket
01

Prototype & Bridge Production

Use molded samples to check clip deflection, mating clearances and contact areas. Where relevant, evaluate dry and agreed conditioned states before deciding on tool revisions and production.

PA6 molded gear carriers prepared for batch review
02

Repeat Production Molding

Connect resin drying, mold temperature, cooling and batch inspection. Use agreed storage, conditioning and measurement timing so samples and production batches can be compared.

Natural and dark PA6 mounting components
03

Reinforced & Modified Grade Review

Evaluate unfilled, glass-filled and other modified PA6 grades for stiffness, toughness, wear or exposure requirements. Fillers also change flow, directional shrinkage and surface appearance.

Start Your PA6 Molding Project

Share your drawings, quantity, loads and service temperature/humidity requirements.

Get a PA6 Molding Quote

PA6 Injection Molding Capabilities

ItemProject review
Grade & reinforcementReview loads, friction, temperature/humidity and filler system together
Tooling & cavitiesPlan tooling for geometry, flow direction, quantity and cooling
Critical dimensionsAgree on datums, tolerances and dry or conditioned measurement conditions
Sampling & productionUse approved samples to check fit, function and behavior under agreed exposure
Surfaces & secondary operationsReview tool finish, molded color and markings for resin and service compatibility
Wall junction and mounting hole on a PA6 support
DESIGN FOR MANUFACTURING

Define Moisture, Flow & Fit Before Tooling

01Drying & Material Handling

Dry the selected PA6 grade before molding and keep the feed dry. Set post-mold conditioning separately for the service environment and measurement plan.

02Walls, Crystallization & Cooling

Review wall consistency, transitions and cooling layout. PA6 is semi-crystalline, so mold temperature and cooling history affect shrinkage and subsequent dimensional behavior; confirm them in tool trials.

03Gates & Reinforcement Direction

For glass-filled grades, review gates, weld lines and the load direction together. Compare flow and transverse shrinkage when setting tooling compensation and evaluating warpage.

04Clips, Gear Features & Assembly Condition

Check clip deflection and repeated assembly, or gear meshing, loads and clearance. For critical fits, agree on moisture condition, test environment and measurement timing rather than inspecting only newly molded parts.

PA6 Surface & Appearance Options

Distinguish tool-generated appearance, resin color and secondary markings. Reinforcement and service exposure may limit finish choices; confirm the result with samples.

Smooth molded face on a PA6 mounting flange
APPEARANCE DIRECTION · 01

Smooth Molded Surface

Plan visible and contact areas with a smooth tool surface. Agree on gloss using molded samples of the selected PA6 grade and reinforcement.

Include Material Condition in Sample Criteria

Define dimensional, fit, cosmetic and functional acceptance separately. For moisture-sensitive parts, record conditioning method, environment and measurement timing. Validate gears or clips under the relevant loads and assembly method.

Requirements & condition → Trial samples → Conditioning/validation → Production acceptance

Nylon 6 (PA6) Material Properties

These typical values and processing recommendations are from the CAMPUS datasheet for BASF Ultramid B3S, a PA6 injection-molding grade. Compare the dry and conditioned columns against the moisture state required for your part.

Physical & Mechanical Reference

PropertyTypical valueMethod / condition
Density1,130 kg/m³ISO 1183
Tensile modulus, dry / conditioned3,500 / 1,200 MPaISO 527
Yield stress, dry / conditioned90 / 45 MPaISO 527
Notched Charpy impact, dry / conditioned4 / 50 kJ/m²ISO 179/1eA; +23°C
Molding shrinkage, parallel0.9%ISO 294-4, 2577
Molding shrinkage, normal0.9%ISO 294-4, 2577

Thermal & Processing Reference

PropertyTypical valueMethod / conditions
Melting temperature220°CISO 11357-1/-3; 10°C/min
Heat deflection temperature65°CISO 75-1/-2; 1.80 MPa
Drying80°C; 4 hSupplier processing recommendation
Maximum allowed water content0.15%Supplier processing recommendation; before molding
Melt-processing temperature250–270°CSupplier injection-molding recommendation range
Mold temperature40–60°CSupplier injection-molding recommendation range
Water absorption, published value9.5%Sim. to ISO 62; exposure duration not shown on the page

Paired results are listed dry first and conditioned second. Use the 40–60°C recommended mold range to plan trials. The 80°C mold condition applies to test-specimen preparation. Review HDT against the test load, then check fit and temperature requirements on parts conditioned for service.

Reference grade: BASF Ultramid B3S, CAMPUS datasheet. Read on 2026-10-20; no document revision date was displayed.

Why Choose PlasticHubs

01

Material & Service Conditions

Connect the PA6 grade, loads and temperature/humidity requirements in one review, identifying which properties need dry or conditioned validation.

02

Tooling to Production

Connect gates and cooling, trial samples and production needs through our group manufacturing resources, reducing information gaps between stages.

03

Assembly & Function

Define sample criteria around clips, gear features, mating clearances and exposure, so acceptance includes the part function.

04

Quality & Project Support

Translate drawings, conditioning and measurement requirements into project checks throughout quotation, sampling and batch acceptance.

What Is Nylon 6 (PA6)?

PA6 pellets and a molded structural component
PA6 pellets and a molded structural component

Nylon 6, or polyamide 6 (PA6), is a semi-crystalline engineering thermoplastic. It can serve molded structural parts requiring toughness, stiffness or wear performance, with behavior determined by the grade and service conditions.

PA6 absorbs moisture from its environment, so dry data, conditioned samples and actual service states are not interchangeable. Compare unfilled, glass-filled, impact-modified and other formulations as separate material choices.

Applications for Injection Molded PA6

PA6 spur-gear carrier assembly
01

Gears & Motion Components

Evaluate PA6 for tooth geometry, meshing clearance, loads and mating surfaces. Validate dimensions, wear and noise under actual humidity and service conditions.

PA6 harness-retaining bracket
02

Harness-retaining Brackets

Review PA6 saddles, mounting ears and harness bend space. Confirm retention for vibration, temperature, humidity and assembly pull using the selected grade and finished samples.

PA6 carry handle for a portable instrument
03

Instrument Handles & Grips

Evaluate stiffness, impact and fit around portable-instrument grips, mounting ends and fasteners. Validate conditioned fits together with service loads.

PA6 cover for a compact actuator assembly
04

Actuator & Equipment Covers

Review PA6 covers around circular chambers, wall transitions and mounting interfaces. Validate molded geometry for loads, temperature, humidity and assembly using relevant samples.

PA6 Benefits and Selection Limits

Mold Features for Motion & Assembly

PA6 formulations provide options for gears, retainers and structural parts. Injection molding integrates mounting, clip and contact features; evaluate economics against tooling investment, design and demand.

When Should PA66 or Another Material Be Evaluated?

Compare specific PA6 and PA66 grades under the expected temperature, humidity and chemical exposure. Use conditioned dimensions and retained stiffness when the part must hold its fit in service.

PA6 INJECTION MOLDING FAQ

PA6 Injection Molding FAQs

PA6 grades, drying, conditioning, reinforcement and project questions.

Are Nylon 6, PA6 and PA66 the same material?

Nylon 6 and PA6 identify the same polyamide type; PA66 is a different nylon. Both have unfilled and modified grades, so PA66 processing guidance or values must not be applied directly to PA6.

Why does PA6 need drying before molding?

PA6 is hygroscopic, and pre-molding moisture affects processing quality. Supplier guidance for BASF Ultramid B3S specifies drying at 80°C for 4 hours and maximum water content of 0.15%. This is grade-specific guidance; account for storage and dry handling, and check instructions for other grades.

How do drying and post-molding conditioning differ?

Drying controls moisture before processing; conditioning brings the molded part to an agreed moisture state. Moisture changes dimensions and mechanical behavior, so critical assemblies need defined conditioning, exposure and measurement timing.

Is glass-filled PA6 always preferable to unfilled PA6?

No. Reinforced formulations can address stiffness targets, but toughness, appearance, wear contacts and directional shrinkage also matter. Compare grades with gates, flow and loads in mind, then confirm warpage and assembly with samples.

How should PA6 and PA66 be selected?

Compare stiffness, toughness, temperature and dimensional requirements under matching dry or conditioned states, including chemical exposure and cost. Use candidate-grade data and samples rather than deciding from a melting point or nylon name alone.

Can PA6 be used for gears and repeatedly assembled clips?

For gears, specify load, clearance and mating surfaces. For clips, specify deflection, assembly force and cycle count. Test molded samples at the expected humidity and temperature.

What is needed for a PA6 quote and sample approval?

Provide CAD, drawings, quantity, grade or functional targets, plus reinforcement, temperature/humidity, fit and measurement condition. Quotation considers tooling, resin, cycle, secondary operations and acceptance scope. Approve dimensions, assembly, surfaces and agreed function separately.

Start Your PA6 Injection Molding Project

Share your CAD, material, quantity, and key requirements. Our team will review your project and prepare a quote.

Request a Quote